Service and repair
8.5.5 LCD panel (message window)
Caution
When disassembling the UI, account for all fasteners removed, as fasteners falling
between the keyboard and the UI display PCB may cause equipment failure.
Remove the LCD panel as follows. Install by reversing removal procedure.
1.
Remove lid (Section 8.5.2).
2.
Using 5-mm nutdriver, remove four M2.5 nuts, internal lockwashers, and fiber washers
that attach LCD panel to UI display PCB. Remove LCD panel (Figure 8-13).
3.
Detach LCD panel ribbon cable from UI display PCB (Figure 8-12).
NOTE:
When installing the LCD panel, be sure ribbon cable is at top of panel.
8-18
10070389 Rev. A
Figure 8-13. Removing LCD panel
Puritan Bennett™ 700 Series Ventilator System Service Manual
LCD panel
7-00187