Dell EMC ME4084 Owner's Manual page 100

Number Severity
424 Info.
425 Info.
426 Info.
427 Warning
428 Info.
429 Info.
430 Info.
431 Error
100 Events and event messages
Description/Recommended actions
• A primary volume conflict exists.
• You cannot delete the volume from a remote system.
• You cannot remove the volume because it is the primary volume.
Recommended actions:
• If any of the above problems exist, resolve them. Then repeat the remove operation with a valid volume.
A request to modify a secondary volume completed successfully.
Recommended actions:
• No action is required.
A replication started.
Recommended actions:
• No action is required.
A replication completed successfully.
Recommended actions:
• No action is required.
• An attempt by a primary volume to send a local configuration tag to a remote volume failed.
• An attempt by a secondary volume to send a local configuration tag to a remote volume failed.
• An attempt to send a local configuration tag to a remote volume failed.
A communication error occurred when sending information between storage systems.
Recommended actions:
• Check your network or fabric for abnormally high congestion or connectivity issues.
A replication was suspended by a user.
Recommended actions:
• No action is required.
A replication was resumed by a user.
Recommended actions:
• No action is required.
A replication was aborted by a user.
Recommended actions:
• No action is required.
A replication was suspended due to an error or a replication was suspended due to a media error on a primary
volume. User intervention is required to resume the replication.
Replication to the indicated volume has been suspended due to an error detected during the replication
process. This can occur for several reasons, such as:
• The cache request was aborted.
• The cache detected that the source or target volume is offline.
• The cache detected a media error.
• The snap pool is full.
• The communication link is busy or experienced an error.
• The snapshot being used for the replication is invalid.
• There was a problem establishing proxy communication.
Recommended actions:
• If the reported problem is with a primary volume, back up as much of the volume as possible.
• Resolve the error and then resume the replication.