Figure 44. Removing an SFF drive module carrier (2 of 2)
3. Remove the drive carrier module from the drive slot.
CAUTION:
To ensure optimal cooling throughout the enclosure, blank drive carrier modules must be installed in all
unused drive slots.
Installing an SFF drive carrier module
Perform the following steps to install an SFF drive carrier module in a 2U enclosure:
1. Press the latch on the drive module carrier to open the handle.
Figure 45. SFF drive carrier module in open position
2. Insert the drive carrier module into the enclosure.
3. Gently slide the drive carrier module into the enclosure until it stops moving.
Figure 46. Installing an SFF drive carrier module (1 of 2)
46
Module removal and replacement