Dell EMC ME4084 Owner's Manual page 93

Number Severity Description/Recommended actions
291 Info. Silvering was started for a mirror component.
Recommended actions:
•
292 Info. ilvering completed for a mirror component.
Recommended actions:
•
293 Info. Silvering was aborted for a mirror component.
Recommended actions:
•
294 Info. A break command completed for a mirror component.
Recommended actions:
•
295 Info. A split command completed.
Recommended actions:
•
296 Info. A join command completed.
Recommended actions:
•
297 Info. A rejoin command completed.
Recommended actions:
•
298 Warning The controller's real-time clock (RTC) setting is invalid.
This event will most commonly occur after a power loss if the real-time clock battery has failed. The time may
have been set to a time that is up to 5 minutes before the power loss occurred, or it may have been reset to
1980-01-01 00:00:00.
Recommended actions:
•
•
When the problem is resolved, event 299 is logged.
299 Info. The controller's RTC setting was successfully recovered.
This event will most commonly occur after an unexpected power loss.
Recommended actions:
•
300 Info. CPU frequency has changed to high.
Recommended actions:
•
301 Info. CPU frequency has changed to low.
Recommended actions:
•
302 Info. DDR memory clock frequency has changed to high.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
Check the system date and time. If either is incorrect, set them to the correct date and time.
Also look for event 246 and follow the recommended action for that event.
No action is required, but if event 246 is also logged, follow the recommended action for that event.
No action is required.
No action is required.
Events and event messages 93