Figure 39. Removing an LFF drive carrier module (2 of 2)
3. Remove the drive carrier module from the drive slot.
CAUTION:
To ensure optimal cooling throughout the enclosure, blank drive carrier modules must be installed in all
unused drive slots.
Installing an LFF drive carrier module
Perform the following steps to install an LFF drive carrier module in a 2U enclosure:
1. Press the latch on the drive module carrier to open the handle.
Figure 40. LFF drive carrier module in open position
2. Insert the drive carrier module into the enclosure.
3. Gently slide the drive carrier module into the enclosure until it stops moving.
Figure 41. Installing an LFF drive carrier module (1 of 2)
4. Push the drive carrier module further into the enclosure until the latch handle starts to engage.
5. Continue to push firmly until the latch handle fully engages. You should hear a click as the latch handle engages and holds the handle
closed.
44
Module removal and replacement