Tool Out Of Range; Run-Out/Edge Missing; Broken Tool - Renishaw NC1 Programming Manual

Error messages and alarms
Message

TOOL OUT OF RANGE

Meaning Either the size of the cutting tool exceeds the size that is
set in parameters RENC[10] to RENC[12] inclusive, or the
tool offset number is wrong.
Action Edit the program. Check the cutter size.
Message

RUN-OUT/EDGE MISSING

Meaning A cutting edge is missing or damaged, or the tool is
eccentric.
Action Replace or adjust the defective tool, or modify the
tolerance value.
Message

BROKEN TOOL

Meaning The tool is out of tolerance.
Action Replace the defective tool and establish the correct tool
offset value.
88