Commands And Menu - EdilKamin KIRA H 18 Installation, Use And Maintenance Manual

From the display, you can:
• Switch from OFF to ON modes, by
pressing and holding the ON/OFF button
• Set the desired room temperature with
the +/- buttons (see below)
In default mode, with the product connected to the power supply, press the ON/OFF button on
the display to "activate" the boiler stove and adjust the desired room temperature with the +/-
buttons. The boiler stove will switch on and off and will adjust its power automatically to keep the
set temperature.
By pressing the "M" button you access the Menu screen
Accessing the Menus, you can set the
following (described on the following
pages)
• Stand By
• Crono (pROGRAM)
• Temperature
• Ventilation (AIR VENTILATION)
• Pellet Load- scReW LoAD
the product is OFF)
• Language
• Beep
• Date / time
• Info (technician only)
• Pressure
• Technical menu (technician only)

coMMAnDs AnD MenU

Dalla schermata di OFF si passa alla schermata di ON oppure di STAND-B
Dalla schermata di OFF si passa alla schermata di ON oppure di STAND-BY
assenza di richieste di calore) tramite la pressione del tasto "ON-OFF" per 3
assenza di richieste di calore) tramite la pressione del tasto "ON-OFF" per 3
La pressione dei tasti "+" e "– " fa modificare il set Ambiente
La pressione dei tasti "+" e "– " fa modificare il set Ambiente
18°
desired room temperature
La pressione del tasto "M" fa accedere alla schermata Menù.
La pressione del tasto "M" fa accedere alla schermata Menù.
PROGRAM
(shown only when
UseR
SPECIFICA TECNICA
SPECIFICA TECNICA
Switching on and off will take a few minutes,
during which the flame must appear or go
off. Just wait without taking any action.
During ignition, the display shows the text
"START".
During switch-off, the display shows the text
"OFF".
Nome:
Nome:
Rev:
Rev:
Data:
Data:
Pagina
Pagina
37