Fitting of the top front panel (2)
1. Undo the two upper screws.
2. Remove the metal support (S).
3. Place the top ceramic front panel (2) on the metal
support (S).
Fit the front panel (2) with the M4 screws provided with
washers
4. Replace the support with the ceramic part and
screw it back to the structure by using the two screws
removed in point 1
Close the combustion chamber door and check the
alignments.
To make alignment adjustments between ceramic/
stone and the door, you can use the top screws.
Left/right adjustments can be made.
KIRA H- LInInG
1
2
s
3
InstALLeR
s
2
s
21