EdilKamin KIRA H 18 Installation, Use And Maintenance Manual page 29

Fitting of the stone or ceramic top (4)
The top part of the lining consists of a grille (G) for the hot
air output and the stone or ceramic top (4).
1. Fit the two rubber buffers provided on the top part of
the grille. They can also be fitted after the grille has been
matched with the top.
2. Place the grille under the ceramic or stone part and
screw it (M6 screws for stone and M4 screws for ceramic).
3. Open the lid of the pellet tank, place the grille and
ceramic top (after screwing them together) onto the stove.
Adjustments can be made by adjusting the feet
supporting the top, or the screws under the sides,
as shown in the fitting of the sides (with top and side
removed).
VyDA H- LInInG
1
2
3
InstALLeR
rubber buffers
4
G
G
4
29