EdilKamin KIRA H 18 Installation, Use And Maintenance Manual page 20

Fitting of the bottom front panel (1)
1. Open the combustion chamber door with the
protective lever (removable handle P) and undo two
screws to remove the bottom metal front panel
2. Fit the ceramic part on the bottom metal front panel
using the M4 screws with washers
Do not force the screw into the pin, it may
break
20
3. Screw the bottom metal front panel - 1 (with the
bottom ceramic front panel already fitted) to the stove.
You can adjust the position of the front panel horizontally
to align it to the door, by moving the screws in the slots
KIRA H- LInInG
1
InstALLeR
1
P
2
1
1
3