EdilKamin KIRA H 18 Installation, Use And Maintenance Manual page 28

Fitting of the stone or ceramic sides (3)
The sides (3) are only hooked on.
1. Place the rubber buffers and hook the sides to the
structure
28
To make alignment adjustments between ceramic/
stone and the door, you can move the top or bottom
screws of the bracket fixed to the structure.
The top screws in their slots allow the alignment with
the top.
The bottom screws in their slots allow the alignment
with the front panel and with the bottom side one.
If the ceramic or stone side is not aligned, remove it,
adjust the screws and put it back.
VyDA H- LInInG
3
rubber buffers
1
Note: see the diagram for correct installation of the
ceramic tile
InstALLeR
3