EdilKamin KIRA H 18 Installation, Use And Maintenance Manual page 27

Fitting of the stone or ceramic top front panel
(2)
1. undo the two upper screws
2. remove the metal support (S)
3. Place the top ceramic or stone front panel (2) on the
metal support (S).
Fit the front panel (2) with the screws provided:
M4 with washers for the ceramic front panel;
M6 for the stone front panel.
Adjustments can be made by using the screws behind
the front panel (S).
Do not force the screw into the pin, it may
break
4. Replace the support with the ceramic part and
screw it back to the structure by using the two screws
removed in point 1.
Close the combustion chamber door and check the
alignments.
To make alignment adjustments between ceramic/
stone and the door, you can use the top screws.
Left/right adjustments can be made.
VyDA H- LInInG
1
2
S
3
4
InstALLeR
S
S
2
back view
2
1
27