EdilKamin KIRA H 18 Installation, Use And Maintenance Manual page 9

DO NOT TRY TO REMOVE THE PRODUCT
FROM THE PALLET WITHOUT HAVING
OPENED THE COMBUSTION CHAMBER
DOOR AND UNDONE THE SCREWS
WHICH FIX IT TO THE PALLET
to ReMoVe KIRA H fRoM tHe PALLet
To remove the boiler stove from the pallet you must (see figures below corresponding to instructions):
1. remove the two brackets (screwed) on the front
2. remove the two brackets (screwed) on the rear of the boiler stove
1
to ReMoVe VyDA H fRoM tHe PALLet
To remove the boiler stove from the pallet you must (see figures below corresponding to instructions):
1. open the combustion chamber door; undo the two screws holding the bottom front panel and remove it to
access the two screws which fix the product to the pallet
2. remove the two brackets (screwed) on the rear of the boiler stove
1
2
KIRA H UnPAcKInG
The drawings are for guidance only, useful for
the installation, but they may not refer to the
specific model.
2
1
Pay attention in order to avoid impacts to
the panel with the display during handling
InstALLeR
screws fixing the product to the pallet
9