Fan Led On The Mx240 Craft Interface; Mx240 Cooling System - Juniper MX240 Hardware Manual

Table 11: SCB LEDs on the Craft Interface
Label Color
OK Green
–
FAIL Red

Fan LED on the MX240 Craft Interface

The fan LEDs are located on the top left of the craft interface.
of the fan LEDs.
Table 12: Fan LEDs on the Craft Interface
Label Color
FAN Green
Red

MX240 Cooling System

IN THIS SECTION
MX240 Cooling System Description | 44
MX240 Fan LED | 45
State Description
On SCB: Fabric and control board functioning
steadily normally.
Blinking SCB is transitioning online or offline.
Off The slot is not online.
On SCB has failed.
steadily
State Description
On Fan is functioning normally.
steadily
On Fan has failed.
steadily
Table 12 on page 43 describes the functions
43