Juniper MX240 Hardware Manual page 135

Table 61: MIC/MPC3 Compatibility (continued)
MIC Name
MS-MIC-16G
(Multiservices MIC)
NOTE: On MPC3E, the installation of the
Multiservices MIC (MS-MIC-16G) with
MIC3-3D-2X40GE-QSFPP,
MIC3-3D-10XGE-SFPP, or
MIC3-3D-1X100GE-CFP does not meet the
NEBS criteria.
NOTE: Only one MS-MIC-16G can be
installed into any MPC.
MIC-3D-40GE-TX
Tri-Rate MIC
MIC-3D-4OC3OC12-1OC48,
MIC-3D-8OC3OC12-4OC48
SONET/SDH OC3/STM1 (Multi-Rate) MICs
with SFP
MIC-3D-4CHOC3-2CHOC12,
MIC-3D-8CHOC3-4CHOC12
MIC-4COC3-2COC12-G,
MIC-8COC3-4COC12-G
Channelized SONET/SDH OC3/STM1
(Multi-Rate) MICs with SFP
MIC-3D-8DS3-E3, MIC-3D-8CHDS3-E3-B
DS3/E3 MIC
NOTE: You cannot run Channelized DS3
(MIC-3D-8CHDS3-E3) on non-Q MPCs.
Channelized DS3 is supported only on Q and
EQ-based MPCs.
MIC-MACSEC-20GE Gigabit Ethernet MIC
with 256b-AES MACSEC
MPC3E MPC3E NG
13.2R2 14.1R4, 14.2R3 with Junos
Continuity
15.1
— 14.1R4, 14.2R3 with Junos
Continuity
15.1
12.1 14.1R4, 14.2R3 with Junos
Continuity
15.1
— 15.1 with flexible queuing
option
12.1 14.1R4, 14.2R3 with Junos
Continuity
15.1
18.3R1 18.3R1
MPC3E NG Q
14.1R4, 14.2R3 with Junos
Continuity
15.1
14.1R4, 14.2R3 with Junos
Continuity
15.1
14.1R4, 14.2R3 with Junos
Continuity
15.1
14.1R4, 14.2R3 with Junos
Continuity
15.1
14.1R4, 14.2R3 with Junos
Continuity
15.1
18.3R1
137