Juniper MX240 Hardware Manual page 50

distribution panels, one of which can be located at the top of the rack that houses the router. An AC power
cord connects each power supply to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that supply AC power to
the router. The C19 appliance coupler at the female end of the cord inserts into the AC appliance inlet
coupler, type C20 (right angle) as described by International Electrotechnical Commission (IEC) standard
60320. The plug at the male end of the power cord fits into the power source receptacle that is standard
for your geographical location.
Table 16 on page 52 provides specifications and
cord provided for each country or region.
Table 16: AC Power Cord Specifications
Country
Australia
China
Europe (except
Denmark, Italy,
Switzerland, and United
Kingdom)
Italy
Japan
North America
United Kingdom
Figure 13 on page 53
Model Number
CBL-M-PWR-RA-AU
CBL-M-PWR-RA-CH
CBL-M-PWR-RA-EU
CBL-M-PWR-RA-IT
CBL-PWR-RA-JP15
CBL-M-PWR-RA-JP
CBL-PWR-RA-US15
CBL-PWR-RA-TWLK-US15
CBL-M-PWR-RA-US
CBL-M-PWR-RA-TWLK-US
CBL-M-PWR-RA-UK
depicts the plug on the AC power
Electrical Specification
240 VAC, 50 Hz AC
220 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz
AC
230 VAC, 50 Hz AC
125 VAC, 50 or 60 Hz
AC
220 VAC, 50 or 60 Hz
AC
125 VAC, 60 Hz AC
125 VAC, 60 Hz AC
250 VAC, 60 Hz AC
250 VAC, 60 Hz AC
240 VAC, 50 Hz AC
Plug Type
SAA/3/15
CH2-16P
CEE 7/7
CEI 23-16/VII
JIS 8303
NEMA L6-20P
NEMA 5-15P
NEMA L5-15P
NEMA 6-20
NEMA L6-20P
BS89/13
52