Denso BHT-200 Supported Equipment Manual page 58

Error Message Resolution Guide
Message Reason
TIMEOUT\n\nReceiving Mobile Unit out of the coverage area.
Data;
Host Received Mobile Unit has sent and received an
Data\nAwaiting App Reply!; acknowledgement from the IP stack and is
waiting for the application to return data.
* WAITING TO SEND *; Mobile Unit out of the coverage area.
TCP Error Reading\nMAC Could not obtain the Mac Address from the
Address.\nREBOOT Mobile Unit.
MOBILE UNIT;
Invalid TIP Command; Bad internal protocol.
Session Ended\nBy User or User, Host, application or network has ended
Host; the session.
Server Packet Error; Bad Protocol detected.
4-4
Solution
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a host or network issue.
Troubleshoot the customer's environment.
Probable causes are Database record
locking, application program failure, Host
failure or network failure.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Possible hardware, driver or stack problem
Contact the Mobile Unit manufacturer.
Notify Connect over the web incident
reporting system.
If the user did not end the session, most
likely host or network issues. Troubleshoot
the customer's environment.
Usually a result of bad cabling, power or
faulty transceiver. Also, will receive this if
the Mobile Unit is in the wrong mode for
Server operation.
Supported Equipment Manual
Reference Tech Note
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
• May, 2006