Denso BHT-200 Supported Equipment Manual page 23

Soft
Viewing keys are enabled.
Hard
Lock
(x,y) coordinates in the host display. The coordinates are zero-based.
Font Size and Bold Font
Font size has a scrolling list of font size options. Bold Font has a check box that enables
(checked) or disables (unchecked) the display of characters in bold font.
Key Click
This check box enables (checked) or disables (unchecked) audible key clicks from the
terminal. The default value is
Printer Type
This scrolling list selects the attached printer type. The default value is
that no printer is attached.
3270 Settings
Select the 3270 emulation setup by clicking on the
Emulation
Then click on the
Supported Equipment Manual
always positions on a quadrant boundary regardless of input field boundaries.
is the same as except the viewing keys are disabled.
Soft
locks the terminal display origin (upper left corner) to fixed row and column
on
menu, as shown below.
selection, as shown below.
3270
•
May, 2006
(checked).
Settings
Standard Setup
, indicating
none
menu and then the
2-17