Table of Contents
Advertisement
Message
Reason
Disconnect
Could Not Disconnect.
ERROR.\nREBOOT
MOBILE UNIT;
RF Send
Could not send.
ERROR.\nREBOOT
MOBILE UNIT;
RF Receive
Could not Receive.
ERROR.\nREBOOT
MOBILE UNIT;
RF Check
Could not run the RF Survey.
ERROR.\nREBOOT
MOBILE UNIT;
RF Timeout
Have been trying to contact the host for the
ERROR.\nREBOOT
radio timeout period (2 minutes default).
MOBILE UNIT;
REBOOT MOBILE UNIT;
Reboot the Mobile Unit do to loss of
connection.
Retry (Y/N)?;
Try again.
TIMEOUT\n\nSending Data; Mobile Unit out of the coverage area.
•
Supported Equipment Manual
May, 2006
Solution
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Try to send or receive again, or perhaps
ensure that the printer is cabled to the
Mobile Unit and is on.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Error Message Resolution Guide
Reference Tech Note
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
4-3
Advertisement
Table of Contents
