Denso BHT-200 Supported Equipment Manual page 32

Terminal Setup
If no options are displayed, click on the
Note:
Enabling Automatic Downloads
Click to put a check in the box that allows terminals to be automatically configured via
RF to enable automatic downloading. In the event that another PC on the network is
already configured and active, the following warning message is displayed.
Synchronizing Configuration Files
Click to put a check in the Synchronize Configuration Files box to enable automatic
synchronization of configuration files on the terminal. When the terminal is cold booted,
its configuration files will be compared with the most recent on the PC. The terminal is
updated automatically if it does not have the latest revision.
Synchronizing Program Files
Click to put a check in the Synchronize Program Files box to enable automatic
synchronization of program files on the terminal. When the terminal is cold booted, its
program files will be compared with the most recent on the PC. The terminal is updated
automatically if it does not have the latest revision.
2-26
button.
Advanced<<
Supported Equipment Manual
•
May, 2006