Denso BHT-200 Supported Equipment Manual page 56

Table of Contents

Advertisement

Error Message Resolution Guide
Message
Reason
INVALID KEY;
The key pressed is not valid.
MUST CLEAR FIELD;
Trying to enter data in a field that must be
cleared first.
SCAN NOT ALLOWED;
Trying to scan into a key only field.
KEY NOT ALLOWED;
Trying to key into a scan only field.
ENTRY TOO SHORT;
Trying to exit the field before it is filled.
RECOVERABLE ERROR;
Encountered an error from which you can
continue.
UNRECOVERABLE
Encountered an error from which you can
ERROR;
NOT continue.
FUNCTION: \n\nFILE:
Encountered an error from which you can
\nLINE: \nCODE;
NOT continue.
Press any key\nFor More
Press Enter for more information.
Details...;
Press any key;
Press a key to continue.
Connection
Could not Connect.
ERROR.\nREBOOT
MOBILE UNIT;
4-2
Solution
Ensure that you are entering input into the
correct field.
Ensure that you are entering input into the
correct field.
Ensure that you are entering input into the
correct field.
Ensure that you are entering input into the
correct field.
Ensure that you are entering input into the
correct field.
Verify that your configuration settings for the
hardware being used, usually a printer and
cable issue.
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Notify Connect over the web incident
reporting system.
Advisory message.
Advisory message.
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Supported Equipment Manual
Reference Tech Note
---
---
---
---
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
• May, 2006

Advertisement

Table of Contents
loading

Table of Contents