Setting Run Time; Setting Acceleration Rate - Hanil Fleta5 Operating Manual

4. Operation

4.8 Setting Run Time

1. Press the Enter knob.
2. Turn the Mode knob to select Time setting mode.
▶ Time setting mode: 00:00:00 flashes.
3. Turn the Enter knob until the desired run time is displayed.
4. Press the Enter knob to save the value.
5. Do you save? appears.
Turn the Mode knob to select [Yes]
6. Press the Enter knob.

4.9 Setting Acceleration Rate

1. Press the Enter knob.
2. Turn the Mode knob to select ACC setting mode.
▶ ACC setting mode: ACC flashes.
3. Turn the Enter knob until the desired acceleration rate is displayed.
4. Press the Enter knob to save the value.
5. Do you save? appears.
Turn the Mode knob to select [Yes]
6. Press the Enter knob.
info@ihanil.com / techsupport@ihanil.com l 15