Hanil Fleta 4 Quick Manual

Quick Guide
Display & Control 안내
Cursor keys / Enter
Function selection(◀,▶)
Increase or decrease
the values(▲,▼)
Save the values ( )
Setting Run
Parameters
(RPM / RCF /
Time / ACC /
DEC / Rotor ID)
Press the
Enter button
RPM setting mode : RPM flashes
RCF setting mode : RCF flashes
Time setting mode : 00' 00'' flashes
Fleta 4
Cat. No. : FL-4
Display Sceen
RPM / RCF / Time / Program / Rotor ID / ACC / DEC
Select a parameter to be Press the
Enter button
changed (Press ◀ or ▶ button)
+ Up or down the values
(Press ▲ or ▼ button)
Rotor ID mode : Rotor flashes
ACC / DEC setting mode : ACC / DEC flashes
Serial No.
Lid Open
Start / Stop / Pulse
Saving / Calling
Up a Program
Press the
Program button
Save Select the program number → Press the Program button → Set the run parameters
→ Press the Enter button
Call up Select the program number → Press Setup / Enter button
Installation Date
Max. RPM 4,000 rpm
Max. RCF 3,243 xg
< 100 min, Pulse
Timer
continuous
ACC / DEC
5/6
Ramps
Program Save / Call
Saving / Calling up a
program (Up to 10)
Pulse
After reaching the set speed,
the centrifugation is decelated
and stopped
Select the program number Press the
Setup / Enter
(Press ▲ or ▼ button)
button