6.6.2.4
Load feeder with hybrid connection
Mounting an S00 load feeder with hybrid connection system
Table 6- 17
Step
1
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
Mounting an S00 load feeder with hybrid connection system
Operating instruction
Insert the connectors (a) on the link module into the corresponding main conductor
terminals (a) on the contactor. Make sure that the guide tabs are inserted into the slots on
the contactor.
Insert the guide tabs (c) into the corresponding slots at the same time.
The link module will sit flush with the contactor on the left- and right-hand sides.
SIRIUS 3RA21/22 load feeders
6.6 Mounting
589