4.9.9.2
Mounting
Various enclosures are available for the motor starter protectors.
Enclosure mounting
Table 4- 26
Mounting the enclosure
Step
Operating instruction
1 / 2
Mount the lower part of the enclosure on a
level surface.
Make sure that the arrow (A) is pointing up.
3 / 4
Snap the motor starter protector onto the rail
in the enclosure as illustrated in the diagram.
Next, screw the enclosure top part to the
lower part of the enclosure (tightening torque
1.2 to 1.5 Nm).
The enclosure can also be sealed with leads
on the bottom right and/or top left.
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
SIRIUS 3RV2 motor starter protectors
Figure
4.9 Accessories
433