Disassembly - Siemens SIRIUS 3RT Series System Manual

SIRIUS 3RV2 motor starter protectors
4.9 Accessories
4.9.3.3

Disassembly

Note
The auxiliary switches are disassembled in the same way for all sizes.
Disassembling auxiliary switches
Table 4- 11
Step
1
2
Table 4- 12
Step
1
2
3
412
Disassembling a transverse auxiliary switch
Operating instruction
Slide a screwdriver underneath the
transverse auxiliary switch. Using the
screwdriver, carefully dislodge the
auxiliary switch.
Pull the transverse auxiliary switch
out at an angle and remove it from
the motor starter protector.
Disassembling a lateral auxiliary switch
Operating instruction
Press the clips on the top and bottom
of the lateral auxiliary switch together.
Run a screwdriver between the motor
starter protector and the lateral
auxiliary switch. Dislodge the auxiliary
switch from the motor starter
protector by carefully turning the
screwdriver.
Remove the lateral auxiliary switch
from the side of the motor starter
protector.
Figure
Figure
System Manual, 01/2011, A8E56203870002-03
SIRIUS Innovations