Load Feeder With Screw-Type Connection System - Siemens SIRIUS 3RT Series System Manual

6.6.2.2

Load feeder with screw-type connection system

Mounting an S00 load feeder with screw-type connection system
Table 6- 9
Step
1
2
3
4
5
6
Note
Mounting the S0 motor starter protector and S00 contactor with screw-type connection
system
The link module for the S00 load feeder can also be used to mount an S00 contactor on an
S0 motor starter protector.
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
Mounting an S00 load feeder with screw-type connection system
Operating instruction
Mount the link module on the contactor.
Insert the pins into the corresponding main
conductor terminals.
Screw the main conductor terminals tight.
Attach the contactor and the link module to
the bottom of the motor starter protector.
Insert the guide tabs into the slots on the
motor starter protector.
Insert the pins into the corresponding main
conductor terminals.
Screw the main conductor terminals tight.
SIRIUS 3RA21/22 load feeders
Figure
6.6 Mounting
577