Terminal Support For Stand-Alone Assembly; Description; Mounting/Disassembly - Siemens SIRIUS 3RT Series System Manual

SIRIUS 3RU2/3RB3 overload relays
5.9 Accessories
5.9.2

Terminal support for stand-alone assembly

5.9.2.1

Description

Modules for stand-alone assembly
3RU21 thermal overload relays and 3RB30/3RB31 solid-state overload relays can also be
installed individually with the corresponding terminal supports for stand-alone assembly.
The terminal supports for stand-alone assembly are available for both screw-type and
spring-loaded connection systems.
5.9.2.2

Mounting/Disassembly

The terminal supports can be snapped onto 35 mm DIN rails according to DIN EN 50022.
They can also be screw-mounted.
The figure below shows how the terminal support for stand-alone assembly is mounted,
based on the example of a 3RU21 thermal overload relay.
Table 5- 20 Mounting the terminal support (screw-type connection system)
Step Operating instruction
1 Guide the overload relay into the terminal
support from below.
Screw the contacts tight.
524
Figure
System Manual, 01/2011, A8E56203870002-03
SIRIUS Innovations