Siemens SIRIUS 3RT Series System Manual page 578

SIRIUS 3RA21/22 load feeders
6.6 Mounting
Mounting an S0 load feeder with screw-type connection system
Table 6- 10
Step
1
2
3
4
5
Note
Reverse the above sequence to disassemble both sizes S00 and S0.
578
Mounting an S0 load feeder with screw-type connection system
Operating instruction
Mount the link module on the contactor.
Insert the connectors into the
corresponding main conductor terminals.
Screw the main conductor terminals tight.
Attach the contactor and the link module to
the bottom of the motor starter protector.
Insert the guide tabs into the slots on the
motor starter protector. Insert the
connectors into the corresponding main
conductor terminals at the same time.
Screw the main conductor terminals tight.
Figure
System Manual, 01/2011, A8E56203870002-03
SIRIUS Innovations