To remove each rail, pull on the latch release button on each flange ear and unseat each rail.
Two-post flush-mount installation
NOTE:
For more installation instructions, see the installation labels attached to the
rail assembly.
1
For this configuration, remove the latch castings from the front side of each
ReadyRails assembly, item 1.
To remove the two screws from each front flange ear on the switch side of the rail and
remove each latch casting, use a Torx screwdriver. Retain the latch castings for future
rack requirements. It is not necessary to remove the back flange castings.
22
S5200F-ON Series switch Installation