This section lists the Z9332F-ON switch specifications.
CAUTION:
Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE:
For RoHS information, see
Topics:
•
Chassis physical design
•
IEEE standards
•
Agency compliance
•
USA Federal Communications Commission statement
•
European Union EMC directive conformance statement
•
Japan VCCI compliance for class A equipment
•
Korean certification of compliance
•
Safety standards and compliance agency certifications
•
Electromagnetic compatibility
•
Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Table 6. Environmental parameters
Parameter
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Maximum thermal output
Maximum operational altitude
Maximum non-operational altitude
Restricted Material
Compliance.
Specifications
1.70 inches (43.1 mm)
17.26 inches (438.5 mm)
25.88 inches (657.5 mm)
31 lbs (14.1 kg)—PSUs and fans
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
Specifications
0° to 45°C (32°F to 113°F) continuously
5% to 90% (RH), non-condensing
–40° to 70°C (–40° to 158°F )
5% to 90%, non-condensing
635W = 2167 BTU/Hr
10,000 feet (3,048 meters)
35,000 feet (10,668 meters)
Specifications
NOTE:
Reduce maximum temperature by 1°C/125
meters (1°F/228 feet) above 950 meters (3,117 feet).
9
Specifications
31