Table of Contents
Advertisement
The following sections describe Z9332F-ON switch:
Topics:
•
Introduction
•
Features
•
Physical dimensions
•
LED display
•
Prerequisites
•
Z9332F-ON switch configurations
•
Luggage tag
Introduction
The Z9332F-ON switch is a one rack-unit, full-featured fixed 10/25/40/50/100/200/400 GbE data center switch with 400 GbE optical
interfaces for data center leaf aggregation. The Z9332F-ON supports 32 QSFP56-DD 400 GbE ports and two SFP+ ports.
This switch is also usable as 25/50/100GbE switch using 25/50/100 GbE breakout for connections to switches, servers, and storage.
NOTE:
For 8x breakout only: if you use any top port as the 8x breakout port, the port directly below the 8x breakout port
only breaks out as follows:
•
400 GbE: 1 x breakout to one 400 GbE interface
•
100 GbE: 1 x breakout to one 100 GbE interface
•
40 GbE: 1 x breakout to one 40 GbE interface
NOTE:
DC power is not supported.
NOTE:
AC power requires HighLine 200–240 VAC support. Using 120 VAC does not provide adequate power for the
system.
The Z9332F-ON switch supports the following optic configurations:
•
32 x 40 GbE
•
32 x 100 GbE
•
32 x 400 GbE—QSFP56-DD
•
64 x 40 GbE—QSFP56-DD > 2 x QSFP+
•
64 x 100 GbE—QSFP56 > 2 x QSFP28
•
128 x 25 GbE
•
128 x 10 GbE
•
128 x 100 GbE
Table 1. Port breakout
Port
QSFP56-DD
QSFP56-DD
QSFP56-DD
QSFP56-DD
SFP+
The Z9332F-ON switch
Size
10 G
25 G
40 G
100 G
1G & 10 G
Breakout
1, 4, or 8
1, 4, or 8
1 or 2
1, 2, or 4
2
The Z9332F-ON switch
2
7
Advertisement
Table of Contents
