Table of Contents
Advertisement
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your switch,
inserting modules, and connecting to a power source.
CAUTION:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
NOTE:
Only trained and qualified personnel can install this equipment. Read this guide before you install and power up
this equipment. This equipment contains two power cables. Disconnect both power cables before servicing.
NOTE:
This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
NOTE:
When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.
NOTE:
Read this guide before unpacking the switch. For unpacking instructions, see Unpack.
Regulatory
Marketing model Z9332F-ON is represented by the regulatory model E49W and the regulatory type E49W001.
Topics:
•
Related documents
•
Information symbols
Related documents
For more information about the Z9332F-ON switch, see the following documents:
•
Dell EMC SmartFabric OS10 User Guide
•
Dell EMC SmartFabric OS10 Release Notes
•
Dell EMC PowerSwitch Z9332F-ON Setup Guide
•
Dell EMC PowerSwitch Z9332F-ON Release Notes
NOTE:
To access product documentation and resources that might be helpful to install, configure, and troubleshoot the
specific Dell EMC switch, see the
support: www.dell.com/support.
Dell EMC Networking Hardware OS10 Info
About this guide
Hub. For all other resources, see Dell EMC
About this guide
1
5
Advertisement
Table of Contents
