This section lists the Z9264F-ON switch specifications.
CAUTION:
Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION:
Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE:
For RoHS information, see
Topics:
•
Chassis physical design
•
IEEE standards
•
Agency compliance
•
USA Federal Communications Commission FCC statement
•
European Union EMC directive conformance statement
•
Japan VCCI compliance for class A equipment
•
Korean certification of compliance
•
China warning
•
Safety standards and compliance agency certifications
•
Electromagnetic compatibility
•
Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
38
Specifications
Restricted Material
Compliance.
Specifications
Specifications
3.37 inches (85.6 mm)
17.4 inches (442 mm)
Chassis: 20.0 inches (510 mm)
PSU/fan tray handle: 1.38 inches (35 mm)
34.6 lbs (2 PSUs and 4 fans)
15.7 kg (2 PSUs and 4 fans)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
9