Specifications; Chassis Physical Design - Dell EMC S4112F-ON Installation Manual

This section lists the S4112–ON Series (S4112F-ON and S4112T-ON) switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see
Topics:
•

Chassis physical design

• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certification of compliance
• Safety standards and compliance agency certifications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 8. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Table 9. Environmental parameters
Parameter
Operating temperature
38

Specifications

Restricted Material Compliance.
Specifications
Specifications
1.75 inches (41.25 mm)
8.2 inches (209 mm)
17.7 inches (450 mm)
S4112F-ON: 8.30 lbs, 3.76 kg (2 PSUs and 3 fans)
S4112T-ON: 8.45 lbs, 3.81 kg (2 PSUs and 3 fans)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
Specifications
5° to 40°C (50° to 104°F)
8