Dump Collection - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance

4.3.6 Dump collection

If you want to collect the dump during system boot, use the following command. The following command
example generates a dump of the CPU module 0. The system must be running in duplex mode for you to use
this method.
# /opt/ft/bin/ftsmaint dump 0
Generated dump of the device at path 0.
In the result, the dump for the ESXi host is saved in /var/core/vmkernel-zdump-MMDDYY.HH:mm.n on the
ESXi host.
34
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
4. Maintenance of Express5800/ft series