Error Messages By Led Indication - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
6.1

Error Messages by LED Indication

The LEDs on the front and rear panels of the Express5800/ft series and near the handles of hard disk drives
inform the user of the various server statuses by the colors and the patterns of going on, going off, and flashing.
If trouble seems to have occurred, check the LED indication.
This Maintenance Guide describes actions to be taken for watch error message. However, if replacement of
modules is necessary, contact your sales agent.
DISK Access LED
Management LAN port
< With Front Bezel mounted >
System POWER LED
EXPRESSSCOPE
< Front Panel >
Module ID LED
10GLAN connector
(R320c-M4 only)
< Rear Panel >
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
System POWER LED
System FAULT LED
System FT LED
System ID LED
System POWER LED
System FAULT LED
System FT LED
System ID LED
Optical disk STATUS LED
LINK/ACT LED
SPEED LED
GLAN connector
Power Unit LED
6. Error Messages
43