Clearing Bios Settings (Cmos Memory) - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
10.3

Clearing BIOS Settings (CMOS Memory)

To set the BIOS settings back to the factory default settings (clearing CMOS memory), use the internal jumper
switch.
You can also clear the password set in the BIOS Setup utility (SETUP) by using the same way.
To clear the password or the CMOS memory, use the corresponding jumper switch illustrated in the figure
below.
PASSWORD Clear Jumper
(PASSCLR)
Tips When the server works, use the BIOS setup utility (SETUP) to return the settings to
the factory defaults.
Important Do not change any other jumper switch settings. Any change may cause the
server to fail or malfunction.
Protect (factory default)
Clear
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
10. Resetting and Clearing the Server
CMOS Clear Jumper
(CMOSCLR)
Protect (factory default)
Clear
79