Chapter 1 Maintenance - NEC Express5800 Series Maintenance Manual

NEC Express5800 Series
Express5800/R320c-E4, R320c-M4
This chapter explains maintenance of server, and what actions are to be taken in case of trouble when operating
this server.
1. Transfer, Relocation, and Disposal
Describes how to transfer this server to a third party. Also describes how to dispose, move and store this
server.
2. Daily Maintenance
Describes what you must confirm for daily use, how to manage files, and how to clean the server.
3 User Support
Describes various services on this product.
4. Maintenance of Express5800/ft series
Describes how to start, stop, diagnose each components of ft server, and how to update firmware.
5. Checking the Duplicating Operation of Modules
Describes how to check if the system runs properly after system installation or reinstallation.
6, Error Messages
Describes error messages and actions to be taken at occurrence of an error.
7. Collecting Failure Information
Describes how to collect information about the location where a failure occurred and its cause when the
server malfunctions. Refer to this section in case of a failure.
8. Troubleshooting
Describes how to identify the causes of problems and what actions are to be taken to address them. Refer to
this section when you suspect a failure.
9. System Recovery
Describes the system recovery setup. Refer to this section when ft control software or Guest OS is corrupt.
12
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
Maintenance
1
1