System Bios; Starting Setup; Parameter Descriptions - NEC Express5800 Series Maintenance Manual

Chapter 3 Useful Features
1.

System BIOS

You can check and change the parameters using the BIOS Setup utility (SETUP).
1.1

Starting SETUP

Turn on the server and proceed with POST.
After a while, the following message appears at the bottom left of the screen.
Press <F2> SETUP, ... (* a different message may appear depending on the environment)
If you press F2, SETUP will start after POST, and the Main menu appears. (You can also start SETUP by
pressing F2 while expanding option ROM.)
1.2

Parameter Descriptions

The SETUP utility has the following six major menus.
• Main
• Advanced
• Security
• Server
• Boot
• Save & Exit
These menus have submenus for relevant items. Selecting submenus allows you to configure further detailed
parameters.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
1. System BIOS
147