NEC Express5800 Series Maintenance Manual page 54

Chapter 1 Maintenance
Messages displayed on a lower LCD line
Message on Lower LCD Line
VBAT Lower Non-Critical
VBAT Upper Non-Critical
VBAT Lower Critical
VBAT Upper Critical
Baseboard Temperature1 Lower Non-Critical
Baseboard Temperature1 Upper Non-Critical
Baseboard Temperature1 Lower Critical
Baseboard Temperature1 Upper Critical
Baseboard Temperature2 Lower Non-Critical
Baseboard Temperature2 Upper Non-Critical
Baseboard Temperature2 Lower Critical
Baseboard Temperature2 Upper Critical
CPU1_DIMM Area Temperature Lower
Non-Critical
CPU1_DIMM Area Temperature Upper
Non-Critical
CPU1_DIMM Area Temperature Lower
Critical
CPU1_DIMM Area Temperature Upper
Critical
CPU2_DIMM Area Temperature Lower
Non-Critical
CPU2_DIMM Area Temperature Upper
Non-Critical
CPU2_DIMM Area Temperature Lower
Critical
CPU2_DIMM Area Temperature Upper
Critical
Processor1 Thermal Control Upper
Non-Critical
Processor1 Thermal Control Upper Critical
Processor2 Thermal Control Upper
Non-Critical
Processor2 Thermal Control Upper Critical
DUMP Request !
Power Supply1 Failure detected
Processor Missing
Processor1 Thermal Trip
54
A voltage abnormality was
detected.
A temperature abnormality was
detected.
The dump button was pressed.
A power supply unit abnormality
occurred.
No CPU is installed.
The power was forcibly turned off
due to a CPU temperature
abnormality.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
Description
Contact your sales representative.
It is possible that a fan has failed or is
clogged. Contact your sales
representative and request repairs.
Wait until collecting the memory dump
data has finished.
Make sure that the power cord is
plugged in. If this does not resolve the
problem, contact your sales
representative and request repairs.
Contact your sales representative and
request CPU or motherboard
replacement.
Contact your sales representative.
6. Error Messages
Solution