Installing Optional Devices; Before Starting Work; Safety Precautions - NEC Express5800 Series Maintenance Manual

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 2 Configuring and Upgrading the System
5.

Installing Optional Devices

This section describes procedures to add/remove optional devices and replace failed components.
5.1

Before Starting Work

5.1.1 Safety precautions

Observe the following notes to install or remove optional devices safely and properly.
Important
Optional devices described in this chapter may be installed or removed by the
user. However, NEC does not assume any liability for damage to optional
devices or the server or malfunctions of the server resulted from installation by
the user.
Use only the devices and cables specified by NEC. You will be charged to repair
damages, malfunctions, and failures caused by the use of any devices or cables
not specified for use with this server even within the warranty period.
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, refer to Safety
precautions in Precautions for Use in User's Guide.
Do not disassemble, repair, or modify the server.
Do not look into the DVD-ROM drive.
Do not remove the lithium battery, NiMH battery, or Li-ion battery.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For details,
refer to Safety precautions in Precautions for Use in User's Guide.
Do not install CPU/IO module with its cover removed.
Make sure to complete component installation.
Do not pinch your finger(s).
Pay attention to hot components.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
WARNING
CAUTION
5. Installing Optional Devices
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r320c-m4Express5800/r320c-e4

Table of Contents