Starting A System Or Logical Partition By Using The Hmc Enhanced + Tech Preview (Pre-Ga) Or Hmc Enhanced+ Interface; Starting An Ibm Powerkvm System - IBM Power Systems EMX0 PCIe Gen3 Manual

Starting a system or logical partition by using the HMC Enhanced + Tech Preview
(Pre-GA) or HMC Enhanced+ interface
Learn how to start a system or logical partition by using the HMC Enhanced + Tech Preview (Pre-GA) or
HMC Enhanced+ interface.
To start a system or logical partition by using the HMC Enhanced + Tech Preview (Pre-GA) or HMC
Enhanced+ interface, complete the following steps:
1. To power on the managed system, complete the following steps:
a. In the navigation area, click the Resources icon
b. Select the system that you want to power on.
c. In the content pane, click Actions > View All Actions > Power On.
d. Click OK.
2. To activate a logical partition, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the logical partition name that you want to activate.
c. In the navigation area, click Partition Actions > Operations > Activate.
d. Click OK.
3. To activate a logical partition for a specific system, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the system name in which you want to activate the logical partition.
c. In the navigation area, click Partitions > View Partitions.
d. Select logical partitions that you want to activate.
e. In the content pane, click Actions > Activate.
f. Click OK.
4. To verify that the logical partition start policy is set to User-Initiated, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the system name to view details.
c. In the navigation area, click Properties > Other Properties.
d. Click the Power-On Parameters tab. Ensure that the Partition start policy field is set to
User-Initiated.

Starting an IBM PowerKVM system

You can use the Intelligent Platform Management Interface (IPMI) to start an IBM PowerKVM system.
To start an IBM PowerKVM system, run the ipmitool -I lanplus -H FSP IP -P ipmipassword chassis
power on command from a remote system.
16
Power Systems: Chassis management card for the EMX0 PCIe Gen3 I/O expansion drawer
, and then click All Systems.
, and then click All Partitions.
, and then click All Systems.
, and then click All Systems.