Preparing The System For Operation After Removing And Replacing The Chassis Management Card In The Emx0 Pcie3 Expansion Drawer - IBM Power Systems EMX0 PCIe Gen3 Manual

C
A
Figure 7. Connecting the power cord to the power supply in the EMX0 PCIe3 expansion drawer
Preparing the system for operation after removing and replacing the
chassis management card in the EMX0 PCIe3 expansion drawer
To prepare the system for operation after removing and replacing the chassis management card in the
EMX0 PCIe3 expansion drawer, complete the steps in this procedure.
Procedure
1. Ensure the input power LED (A) on the power supplies is on. See Figure 8.
A B
Figure 8. Verifying the power supply LEDs are on
6
Power Systems: Chassis management card for the EMX0 PCIe Gen3 I/O expansion drawer