Download Print this page

IBM EMX0 PCIe Gen3 Installing

Hide thumbs

Advertisement

Quick Links

Power Systems
Installing an EMX0 PCIe Gen3 I/O
expansion drawer
IBM
GI11-9914-08

Advertisement

loading

  Also See for IBM EMX0 PCIe Gen3

  Related Manuals for IBM EMX0 PCIe Gen3

  Summary of Contents for IBM EMX0 PCIe Gen3

  • Page 1 Power Systems Installing an EMX0 PCIe Gen3 I/O expansion drawer GI11-9914-08...
  • Page 2 Note Before using this information and the product it supports, read the information in “Safety notices” on page v, “Notices” on page 41, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, Z125–5823. ®...
  • Page 3: Table Of Contents

    Contents Safety notices......................v Installing an EMX0 PCIe Gen3 I/O expansion drawer..........1 Installing or setting up an EMX0 PCIe3 expansion drawer................ 1 Preparing the system to install or set up an EMX0 PCIe3 expansion drawer........1 Completing inventory for installing the EMX0 PCIe3 expansion drawer..........4 Determining and marking the location in the rack................
  • Page 5: Safety Notices

    Das Produkt ist nicht für den Einsatz an Bildschirmarbeitsplätzen im Sinne § 2 der Bildschirmarbeitsverordnung geeignet. Laser safety information IBM servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs. Laser compliance IBM servers may be installed inside or outside of an IT equipment rack.
  • Page 6 • To avoid hazardous conditions due to uneven mechanical loading, always install the heaviest devices in the bottom of the rack cabinet. Always install servers and optional devices starting from the bottom of the rack cabinet. vi Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 7 • Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top of rack-mounted devices. In addition, do not lean on rack mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). •...
  • Page 8 DANGER: Hazardous voltage, current, or energy levels are present inside any component that has this label attached. Do not open any cover or barrier that contains this label. (L001) (L002) viii Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 9 DANGER: Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top of rack-mounted devices. In addition, do not lean on rack-mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). Stability hazard: •...
  • Page 10 DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power cables. (L003) (L007) CAUTION: A hot surface nearby. (L007) x Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 11 Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local regulations. In the United States, IBM has a process for the collection of this battery. For information, call 1-800-426-4333. Have the IBM part number for the battery unit available when you call.
  • Page 12 Be sure winch is locked in position before releasing handle. Read instruction page before operating this winch. Never allow winch to unwind freely. xii Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 13 Freewheeling will cause uneven cable wrapping around winch drum, damage cable, and may cause serious injury. • This TOOL must be maintained correctly for IBM Service personnel to use it. IBM shall inspect condition and verify maintenance history before operation. Personnel reserve the right not to use TOOL if inadequate.
  • Page 14 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 15: Installing An Emx0 Pcie Gen3 I/O Expansion Drawer

    Installing an EMX0 PCIe Gen3 I/O expansion drawer Learn how to install an EMX0 PCIe Gen3 I/O expansion drawer (EMX0 PCIe3 expansion drawer) into a rack or remove the shipping bracket from a preinstalled EMX0 PCIe3 expansion drawer. Then, learn how to connect the EMX0 PCIe3 expansion drawer to your system and activate the PCIe link.
  • Page 16 To install a PCIe3 cable adapter to accommodate an EMX0 PCIe3 expansion drawer, see the following procedures: • If your system is managed by an HMC, see Installing a part by using the HMC (http://www.ibm.com/ support/knowledgecenter/POWER9/p9haj/hmcinstall.htm). • If your system is not managed by an HMC, see PCIe adapters (http://www.ibm.com/support/ knowledgecenter/POWER9/p9hak/pciadapters.htm).
  • Page 17 (http://www.ibm.com/support/knowledgecenter/POWER9/p9hbf/ p9hbf_9xx_kickoff.htm). • Help to lift the EMX0 PCIe3 expansion drawer into the rack, which requires three people. b) Determine where to install a new EMX0 PCIe3 expansion drawer. Installing an EMX0 PCIe Gen3 I/O expansion drawer 3...
  • Page 18: Completing Inventory For Installing The Emx0 Pcie3 Expansion Drawer

    2. Determine where in the rack to place the drawer in relation to other system hardware. As you plan for installing the drawer in a rack, keep in mind the following information: Important: • The EMX0 PCIe3 expansion drawer must be placed above the system when possible. 4 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 19 5 seconds before you continue with the service process. 5. If necessary, remove the filler panels to allow access to the inside of the rack enclosure where you plan to place the enclosure or drawer. Installing an EMX0 PCIe Gen3 I/O expansion drawer 5...
  • Page 20 Count up two holes and place another mark beside that mounting hole (B). You now have two marks on the rack (B), with one mounting hole between the marks. 6 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 21 Count up three holes and place another mark beside that mounting hole (D). You now have two marks on the rack (D). Insert nut clips in these two locations. Figure 4. Marking the rear installation locations Installing an EMX0 PCIe Gen3 I/O expansion drawer 7...
  • Page 22: Attaching The Mounting Hardware To The Rack

    Do not install mismatched hardware by using washers or spacers. If you do not have the correct rails and fittings for your rack, contact your IBM reseller. Important: To complete this procedure, it is suggested that you use two people to attach the rail assembly to the rack.
  • Page 23 Extend the left rail and insert the rail pins (D) into the two lowest mounting holes that are marked on the rack. Rotate up the front clamp (C) to secure the rail in place. Installing an EMX0 PCIe Gen3 I/O expansion drawer 9...
  • Page 24: Installing An Emx0 Pcie3 Expansion Drawer Into A Rack

    Find information about installing an EMX0 PCIe3 expansion drawer into a rack. Before you begin Important: Three people are required to safely lift the drawer. Using fewer than three people to lift the drawer can result in injury. 10 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 25 Using the two blue touch points on each side of the drawer, pull the cover straight out to remove the cover from the front of the drawer as shown in Figure 8 on page 12. c. Remove the service information card from the slot in the cover. Installing an EMX0 PCIe Gen3 I/O expansion drawer 11...
  • Page 26 Slide the drawer into position over the slide rails and slide the drawer into the rack. c) Install the two M5 securing screws (J) through the drawer and into the nut clips on the left and right rails. 12 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 27 Press the cover (L) into place and secure it with two M5 screws (M) on the left and right rails as shown in Figure 10 on page 14. b) Insert the service information card (N) into the slot in the cover. Installing an EMX0 PCIe Gen3 I/O expansion drawer 13...
  • Page 28 Figure 11 on page 15. d. Completely tighten the top two M5 screws (C) above the rail clamp where nut clips are installed. e. Finish tightening the bottom two M5 screws (A). 14 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 29 Pull out the quarter-turn fasteners (B) and turn them to disengage them while you lift the cable management bracket (A) to its raised position. b. Turn the quarter-turn fasteners (B) to engage and lock the bracket into position. Installing an EMX0 PCIe Gen3 I/O expansion drawer 15...
  • Page 30 Pull the quarter-turn fasteners (B) out and turn them to disengage them while moving the cable management bracket (A) to its lower position (2). See Figure 13 on page 17. b. Turn the quarter-turn fasteners (B) to engage and lock the bracket into position. 16 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 31 (B) as shown in the following figure. Note: If you have a different scenario, the securing screws are optional. Installing an EMX0 PCIe Gen3 I/O expansion drawer 17...
  • Page 32: Connecting An Emx0 Pcie3 Expansion Drawer To Your System

    (http://www.ibm.com/support/knowledgecenter/POWER9/p9hak/pciadapters.htm). • For instructions to install a PCIe3 6-slot fanout module when you do not have an HMC, see Installing the PCIe3 6-slot fanout module in the PCIe Gen3 I/O expansion drawer (http://www.ibm.com/support/ knowledgecenter/POWER9/p9egv/p9egv_emx0_kickoff_install.htm). • For instructions to install a PCIe3 cable adapter or PCIe3 6-slot fanout module when your system is managed by an HMC, see Installing a part by using the HMC (http://www.ibm.com/support/...
  • Page 33: Routing, Connecting, And Activating The Expansion Drawer Cable Pair Or Pairs

    Important: To avoid damage to the connectors on the expansion drawer cables, do not remove the protective covers until just before you need to plug the cable into the host system or the EMX0 PCIe3 expansion drawer. Installing an EMX0 PCIe Gen3 I/O expansion drawer 19...
  • Page 34 Leave the cable near where it will be plugged. j) Route the other end of the cable to the EMX0 PCIe3 expansion drawer to which it attaches. k) Leave the cable near where it will be plugged. 20 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 35 Route the cable and place the connector end (K) near the I/O module on the EMX0 PCIe3 expansion drawer. 7. Repeat steps “4” on page 20 - “6” on page 21 for the other cable pair. Installing an EMX0 PCIe Gen3 I/O expansion drawer 21...
  • Page 36 EMX0 PCIe3 expansion drawer. 2) Route the power cables through the s-carabiner so that the cables clear the PCIe3 6-slot fanout module or modules. 22 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 37 13. Continue with step “15” on page 24. Note: If you are using the HMC panels, they will show the remaining procedure. If you want, you can look at them here to become familiar with the steps. Installing an EMX0 PCIe Gen3 I/O expansion drawer 23...
  • Page 38 Remove the protective cover and connect the other end of the expansion drawer cable that is located near connector T2 on the PCIe3 6-slot fanout module in the EMX0 PCIe3 expansion drawer. 24 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 39 Important: Ensure that you plug the power cables into the power source before you connect them into the power supply of the EMX0 PCIe3 expansion drawer. b. Route the power cables through the s-carabiner so that the cables clear the PCIe3 6-slot fanout module or modules. Installing an EMX0 PCIe Gen3 I/O expansion drawer 25...
  • Page 40 21. If you connected the expansion drawer cables with the system power turned off, you will need to power on the system to firmware standby state and check for serviceable events. Then, you will need 26 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 41 To reset the Server firmware start policy field to its original value, complete the following steps: 1) In the ASMI navigation area, expand Power/Restart Control. 2) Click Power On/Off System. Installing an EMX0 PCIe Gen3 I/O expansion drawer 27...
  • Page 42: Preparing Your System For Operation After Connecting An Emx0 Pcie3 Expansion Drawer To Your System

    1. If the system has a rear door, close or replace it. 2. Verify that the system or logical partition recognized the EMX0 PCIe3 expansion drawer. Verify the installed part. For instructions, see Verifying the installed part (www.ibm.com/support/ knowledgecenter/POWER9/p9haj/pxhaj_hsmverify.htm). 3. If the system has logical partitions, you can now assign I/O slots in the expansion drawer that was added to the logical partitions.
  • Page 43: Connector Locations

    (T1) and bottom (T2) expansion drawer cable connectors For more information about the EMX0 PCIe3 expansion drawer locations, see EMX0 PCIe3 expansion drawer locations (http://www.ibm.com/support/knowledgecenter/POWER9/p9ecs/ p9ecs_emx0_loccodes.htm). For more information about the server locations, see Part locations and location codes (http:// www.ibm.com/support/knowledgecenter/POWER9/p9ecs/p9ecs_locations.htm). © Copyright IBM Corp. 2018, 2020...
  • Page 44: Connector Locations For Power9 Servers

    9223-22S systems Learn about connector locations for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, and 9223-22S systems. Figure 21. Connector locations for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, and 9223-22S systems 30 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 45: Connector Locations For The 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, And 9223-42S Systems

    Connector locations for the 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, and 9223-42S systems Learn about connector locations for the 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, and 9223-42S systems. Figure 22. Connector locations for 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, and 9223-42S systems Connector locations 31...
  • Page 46: Connector Locations For The 9040-Mr9 Systems

    12, 9, 11, 8, 5, 12, 9, 11, 8, 5, 6/8/10 RAID quad-port 10, 7, 4 3, 10, 7, 4, 2 6 Gb x8, low- profile capable adapter (FC EJ0K; CCIN 57B4) 32 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 47: Connector Locations For The 9080-M9S System

    Table 2. Slot priorities for the FC EJ0K (continued) Feature code Description Slot priorities Slot priorities Slot priorities Maximum for two for three for four number of processors processors processors adapters supported Note: The C9 and C12 slots are used for controlling the internal disk drive bays and have limited availability for attaching a 5887 disk drive enclosure or an ESLL or ESLS storage enclosure.
  • Page 48: Connector Locations For Power8 Servers

    Learn about connector locations for the 8247-21L, 8247-22L, 8284-21A, and 8284-22A systems. The expanded function 8247-21L, 8247-22L, 8284-21A, and 8284-22A servers provide cable connector locations via a SAS port for disk drive enclosures. 34 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 49: Connector Locations For The 8286-41A System

    Figure 25. Connector locations for the expanded function 8247-21L, 8247-22L, 8284-21A, and 8284-22A systems Connector locations for the 8286-41A system Learn about connector locations for the 8286-41A rack-mounted and stand-alone models. The 8286-41A server provides cable connector locations via a SAS port for disk drive enclosures. Figure 26.
  • Page 50: Connector Locations For The 8247-42L And 8286-42A Systems

    Learn about connector locations for the 8247-42L and 8286-42A rack-mounted models. The 8247-42L and 8286-42A (expanded function) servers provide cable connector locations via a SAS port for disk drive enclosures. 36 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 51: Connector Locations For The 8408-44E And 8408-E8E Systems

    Figure 28. Connector locations for the 8247-42L and 8286-42A (expanded function) systems Connector locations for the 8408-44E and 8408-E8E systems Learn about connector locations for the 8408-44E and 8408-E8E systems. The 8408-44E and 8408-E8E systems provide cable connector locations via a SAS port (P1-C5-T3) for disk drive enclosures and cable ports (P1-C5-T1 and P1-C5-T2) for the EMX0 PCIe3 expansion drawer Connector locations 37...
  • Page 52: Connector Locations For The 9080-Mhe, 9080-Mme, 9119-Mhe, And 9119-Mme Systems

    Learn about connector locations for the 9080-MHE, 9080-MME, 9119-MHE, and 9119-MME systems. The 9080-MHE, 9080-MME, 9119-MHE, and 9119-MME servers provide cable connector locations via a SAS port for disk drive enclosures and cable ports for the EMX0 PCIe3 expansion drawer. 38 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 53 Figure 30. Connector locations for the 9080-MHE, 9080-MME, 9119-MHE, and 9119-MME systems Connector locations 39...
  • Page 54 40 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 55: Notices

    Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
  • Page 56: Accessibility Features For Ibm Power Systems Servers

    This product uses standard navigation keys. Interface information The IBM Power Systems servers user interfaces do not have content that flashes 2 - 55 times per second. The IBM Power Systems servers web user interface relies on cascading style sheets to render content properly and to provide a usable experience.
  • Page 57: Privacy Policy Considerations

    Contact the vendor for accessibility information about its products. Related accessibility information In addition to standard IBM help desk and support websites, IBM has a TTY telephone service for use by deaf or hard of hearing customers to access sales and support services:...
  • Page 58 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
  • Page 59 Generelle Informationen: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 / EN 55032 Klasse A. Japan Electronics and Information Technology Industries Association (JEITA) Notice This statement applies to products less than or equal to 20 A per phase. This statement applies to products greater than 20 A, single phase.
  • Page 60 Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
  • Page 61: Class B Notices

    Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
  • Page 62 This statement applies to products greater than 20 A, single phase. This statement applies to products greater than 20 A per phase, three-phase. Japan Voluntary Control Council for Interference (VCCI) Notice 48 Power Systems: Installing an EMX0 PCIe Gen3 I/O expansion drawer...
  • Page 63: Terms And Conditions

    Permissions for the use of these publications are granted subject to the following terms and conditions. Applicability: These terms and conditions are in addition to any terms of use for the IBM website. Personal Use: You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved.
  • Page 64 IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of the publications is detrimental to its interest or, as determined by IBM, the above instructions are not being properly followed.
  • Page 66 IBM® Part Number: 02DE297 GI11-9914-08...