Overview - Settings; Settings - Handset, Ringer; Base Settings; Overview - Handset Settings - Siemens Gigaset 2000C Operating Instructions Manual

Settings
Overview – settings
Setting Explanation/notes
Handset Call volume;
Volume Level 1 is not shown in the
display!
Volume and tone
Ringer
Options (call signal, bell)
Low to high or
– volume ringer off
Set tone frequency
– tone
Register see page 17
Base see page 48
Settings
see page 50
Handset
Settings
Note:
 
Before it is saved, each setting can be cancelled
using or and you can return to the higher-
level display.
On-hook key for terminating/cancelling functions
and returning to the "on" status immediately.
46
Settings

Settings – handset, ringer...

Level Default



3 1
  5 "#

   
 
  
6 6
   
0

10 2

Example: Setting the ringer volume
– – 
– –



– – 
   

1  5 "#

  7% ! 
 
 

See page 62 for information about acoustic signals!
Press the menu key.
  
Scroll to
and confirm.
For an explanation of the individual
settings, see the section entitled
"Overview – settings", page 46.
Press the menu key.
  
Scroll to
and confirm.
   
Scroll to
and confirm.
Confirm the ringer volume – the ringer
volume audible is specific to the cur-
rent setting (default: level 6), see the
display.
Symbol for ringer
Dark bars indicate the current

setting – level 3 in this case
Confirm current setting

(save)
Change the setting
Press the display keys to set the
required volume and confirm.
47
Settings

Base settings

You can rename the preset base names "Base 1" through
"Base 6". Within a company, for example, base 1 could be
changed to "Plant 1" and base 2 changed to "Plant 2".

Changing the base name

Press the menu key.
  
Scroll to



and confirm.


   
Scroll to


 and confirm.

Scroll to the desired base.
e.g.


 4
Press the display key.
)  # & 
 !
Confirm

# *  4
 4

 
flashes.
Name Enter a new name for base 1
(max. 16 characters).
Enter letters/characters and correct if


necessary, see page 33 and 34.
Press the display key.

$  "  
Confirm

48
.
.