Clear Cmos Jumper; Figure 5-9: Cf Card Setup Jumper Location - IEI Technology PCIE-9452 User Manual

PCIE-9452 PICMG 1.3 CPU Card

Figure 5-9: CF Card Setup Jumper Location

5.4.2 Clear CMOS Jumper

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
If the PCIE-9452 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.
If the "CMOS Settings Wrong" message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
J_CMOS1
3-pin header
See Table 5-3
See Figure 5-10
Page 89