Channel Audio Kit Installation; Figure 5-12: Ide Cable Connection - IEI Technology PCIE-9452 User Manual

PCIE-9452 PICMG 1.3 CPU Card

Figure 5-12: IDE Cable Connection

Step 3: Connect the cable to an IDE device. Connect the two connectors on the other
side of the cable to one or two IDE devices. Make sure that pin 1 on the cable
corresponds to pin 1 on the

5.6.3 5.1 Channel Audio Kit Installation

NOTE:
This is an optional item that must be ordered separately. For further
information please contact the nearest PCIE-9452 distributor, reseller
or vendor or contact an iEi sales representative directly. Send any
queries to sales@iei.com.tw.
connectorStep 0:
Page 95