Cf Card Setup; Table 5-2: Cf Card Setup Jumper Settings - IEI Technology PCIE-9452 User Manual

5.4.1 CF Card Setup

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 5-2.
AT Power Select
Short 1-2
Short 2-3

Table 5-2: CF Card Setup Jumper Settings

The CF Card Setup jumper location is shown in Figure 5-9.
Page 88
PCIE-9452 PICMG 1.3 CPU Card
J_CF1
3-pin header
See Table 5-2
See Figure 5-9
Description
Slave Default
Master