Lvds Voltage Selection; Table 5-4: Lvds Voltage Selection Jumper Settings - IEI Technology PCIE-9452 User Manual

PCIE-9452 PICMG 1.3 CPU Card

5.4.3 LVDS Voltage Selection

WARNING:
Permanent damage to the screen and PCIE-9452 may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The LVDS
Voltage Selection jumper settings are shown in Table 5-4.
AT Power Select
Short 1-2
Short 2-3

Table 5-4: LVDS Voltage Selection Jumper Settings

The LVDS Voltage Selection jumper location. is shown in Figure 5-11.
J_VLVDS1
3-pin header
See Table 5-4
See Figure 5-11
Description
+3V LVDS Default
+5V LVDS
Page 91